#9 instructions?

[Blr123]

Hello everyone,

Just bought #9 swirl remover 2.0, however the back label with the instructions has been torn off.

Is there anything special I should be doing when applying with a G-100?

Bryan

[gb387]

Re: #9 instructions?

Originally posted by Blr123
Hello everyone,

Just bought #9 swirl remover 2.0, however the back label with the instructions has been torn off.

Is there anything special I should be doing when applying with a G-100?

Bryan

Nothing special really, same as other cleaner/polishes.... Here is the label from the back of my #9 2.0

METHOD OF APPLICATION: For use by hand, orbital buffer, DA polisher or rotary. (NOTE: If using a rotary buffer, be sure you are familiar with its proper use.)

DIRECTIONS: SHAKE WELL. Apply in the SHADE on a COOL SURFACE. If finish is neglected or has severe swirl marks, call Meguiars Customer Care Center at 800-347-5700 for technical assistance. Do not apply to vinyl or rubber surfaces. Work one section at a time. For best results use a high speed rotary buffer equipped with a Mirror Glaze polishing pad. If applying by hand, use a clean, dry, soft, 100% cotton terry towel or foam applicator. Work product until nearly dry. Use a clean towel to wipe off excess. For tough, long-lasting protection, follow with an application of Mirror Glaze Professional Yellow Wax (#26)