Tweet
im new to the scene and i have a 94 camaro z28 in white now the paint is in good condition but need a good clay which i already did to the front bumper im aplying by hand dc1 or scratch x where needed dc2 and 2 thin coats nxt by hand should i expect to see wet look results on my black roof because after the clay the qd left like a little bit of a haze even after a wash with nxt wash , will dc1 remove the hazy look its like large weaterspots left form it but its not waterspots same look thought i did it in cool shade and wife qd of immedialtly when finished claying the area with a mf towel
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
Last edited by WhiteCamaro88; Sep 6, 2005, 05:23 PM."A musclecar, by definition, is a powerful and sporty vehicle that must be able to spin its tires at will. The Firebird Trans Am is capable of laying down twin black streaks of rubber several hundred feet long. We wanted to be sure it could, so we did it a half dozen times in the name of automotive science." - Motor Trend -
Re: help detailing
If the black roof is normal basecoat/clearcoat paint, then polishing and waxing should remove any haze and restore gloss and shine.Originally posted by WhiteCamaro88
I'm new to the scene and i have a 94 Camaro z28 in white now the paint is in good condition but need a good clay which i already did to the front bumper I'm applying by hand DC1 or scratch x where needed DC2 and 2 thin coats NXT by hand should i expect to see wet look results on my black roof because after the clay the QD left like a little bit of a haze even after a wash with NXT wash ,
Try applying either a little ScratchX or Deep Crystal Paint Cleaner, after applying and working the product into the finish, remove with a clean soft microfiber polishing cloth and inspect.will DC1 remove the hazy look its like large water spots left form it but its not water spots same look thought i did it in cool shade and wife QD of immediately when finished claying the area with a MF towel
ScratchX is more powerful at cleaning and removing defects than DC1, so choose your product accordingly. After cleaning with the paint cleaner, next apply a polish and then two coats of wax.
Read this,
Comment