Tweet
ok so i have used #80 on my car, left the finish squeeky clean, then polished with DC-2 , now i want to add a layer of gold class and #26 in that order, or should it be #26 then gold class..the color is titanium grey, its a mazda axela for those that know the car, knows the color, its a light charcoal grey with glittery specs/metalic in it, im trying to bring out the metalic in the grey paint as much as possible..your thoughts are appreciated..
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
"that car is dirty" -
Hey,
If you are going to layer, I would suggest the Gold Class followed by the #26.
Tim -
YepOriginally posted by 2hotford
Hey,
If you are going to layer, I would suggest the Gold Class followed by the #26.
Tim2005 Nissan Altima 2.5SComment
-
ok so i just finished applying the gold class by hand on top of the #80,it brought out the metalic in the paint a lil bit, im hoping the #26 will help bring it out more, after the #26 i may add another layer of 26 or maybe try a layer of gold clas on top of the 26..."that car is dirty"Comment
-
The #26 brings a nice deep look to it. I would do one coat of #26 and maybe a 2nd coat of the #26 just to make sure you have full coverage of the wax. i wouldn't put GC on top of the #262005 Nissan Altima 2.5SComment
-
cool, gotcha
"that car is dirty"Comment
Comment