What Steps ???? and some PIC's

[x02gt]

I am new at this so here it goes, everyone talks about #80,#81,#82,#83, and so on, but I don't know what any of these look like or were to get them, or what steps to go in, and still a little LOST when it comes to polishing my car.. I have clay bared it before, and I already use NXT on just about everything, but now I have a G-100a, and really would like to know how to use it, and in what steps.. My car has VERY little swirl mark, and improfections, but it is a BLACK car and EVERYONE knows how that is!!!! I want it to LOOK WET with NO swirls at ALL.. SO CAN YA'LL HELP ME !!!!!!!!

[Lt1Corvette]

Those polishing products are from the professional line. If you are not in a next day hurry, I would order them from Meguiars.com. Easy. Or if you go on meguiars.com, there is a store locator based on area code. What kind of car do you have? I would start with #80 on a 8006 polishing pad. If that doesn't do it, then I would go for #83 with an 8006 pad, little more aggressive.
Good luck and post some pics.

[x02gt]

I have a 2002 Mustang GT, Black on Black with Black deep dish wheels. Click the link to see my car. So a #80 or #83 is what I start with, if there are no swirls in my car???

[x02gt]

and one of the inside, it is a must SEE

CLICK

[x02gt]

and one on the Mustang Dyno, with my old wheels

CLICK

[x02gt]

Well??? Can no one HELP???

[RamAirV1]

Whatever you're doing now looks pretty good! Can't see any swirls. Great shine, very deep and reflective. Apply NXT liquid or paste with the finishing pad and remove with Ultimate Bonnet (set to 5.0) the next time you wax. You may want to try the Spray Booster Wax after every time you wash.

Also get some NXT Speed Detailer. It will add even more gloss and slickness.

RamAirV1

[gb387]

You may have seen it but there is some good info in this post on the different product MOL member use on black.

This link will tell you how to use a cleaner/polish/wax with the PC.

This post will help with speed/pad selection..

Hope those help!

PS nice looking car!

[x02gt]

Originally posted by gb387
You may have seen it but there is some good info in this post on the different product MOL member use on black.

This link will tell you how to use a cleaner/polish/wax with the PC.

This post will help with speed/pad selection..

Hope those help!

PS nice looking car!

You also have a VERY NICE truck
You have to love FORD!!!