for all the great tips. For the first time i detailed my wife's Honda Pilot this past weekend. Here was my process:
1) Washed with the Deep Crystal wash with the two bucket method.
2) Used detailing clay (had to use Mothers as I was unable to find Meg's at any store in my area)
3) Scratch-X to remove a lot of surface scratches. After my first go 'round the car, it had done an okay job. But I spent a little more time on one particular scratch and it completely removed it (at least to my eye). So I went back on some of the other ones and put a little "passion" into it. Rubbed for over a minute on each one and added a second layer. Took out all of the scratches save the 2 that were too deep. Amazing results.
4) Used the DC1 Paint Cleaner on the whole car.
5) Used the DC2 Polish on the whole car.
6) Initial coat of NXT Tech Wax. Let stand for 20 minutes and wiped off.
7) Additional coat the following day.
My wife was completely amazed at how the car looked. Very happy.
I do have one question: There seems to be a color inconsistency in places. No swirling or hazing just deeper patches of black than others. The areas that are lighter look perfect but the deepness seems slight off. I doubt anyone could tell by just passing by but I wanted to know if there was something I missed or didn't do.
Thanks to this forum for picking up a lot of good tips. Any help on my one issue would be appreciated.
1) Washed with the Deep Crystal wash with the two bucket method.
2) Used detailing clay (had to use Mothers as I was unable to find Meg's at any store in my area)
3) Scratch-X to remove a lot of surface scratches. After my first go 'round the car, it had done an okay job. But I spent a little more time on one particular scratch and it completely removed it (at least to my eye). So I went back on some of the other ones and put a little "passion" into it. Rubbed for over a minute on each one and added a second layer. Took out all of the scratches save the 2 that were too deep. Amazing results.
4) Used the DC1 Paint Cleaner on the whole car.
5) Used the DC2 Polish on the whole car.
6) Initial coat of NXT Tech Wax. Let stand for 20 minutes and wiped off.
7) Additional coat the following day.
My wife was completely amazed at how the car looked. Very happy.
I do have one question: There seems to be a color inconsistency in places. No swirling or hazing just deeper patches of black than others. The areas that are lighter look perfect but the deepness seems slight off. I doubt anyone could tell by just passing by but I wanted to know if there was something I missed or didn't do.
Thanks to this forum for picking up a lot of good tips. Any help on my one issue would be appreciated.
Comment