Tweet
D302 & Optimum Gloss Coat
I'm planning to use Meg MF correction system (D300 & D302) prior to use Optimum Gloss Coat 10CC. The question is do I need to use 20%IPA prior to the coating or I can go straight to Optimum Gloss Coat after D302 application.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: D302 & Optimum Gloss Coat
I would IPA per opti-gloss's directions just to be sure the surface is completely clean so OG can bond to the paint. -
Re: D302 & Optimum Gloss Coat
If Optimum tells you to IPA wipe before application of their product, which they do, then do it. Simple as that, really. Make sure you've got really good lighting and that you inspect very closely for high spots as the product flashes off. It's easy enough to compound this product off if you do something wrong, but it's an expensive enough product that you want to avoid this if you can.Michael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
Comment
-
Re: D302 & Optimum Gloss Coat
Yes, that is correct Optimum recommends to do 20% IPA however, if I recall it correctly somewhere I have read that you can go straight to coating after D302 application. I know it's not an issue and I'll do IPA anyway. ThanksComment
Comment