What is your favorite polish to use after finishing with M205 ?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
What is your favorite polish.....
Collapse
X
-
Re: What is your favorite polish.....
What are you looking to achieve beyond what M205 gives? For many, M205 is their #1 polish choice for both gloss and clarity. Use it at slow speed with a rotary and a foam finishing pad at very low speed and you'll seriously get that paint poppin'. Or massage the paint a bit with M205 on a foam finishing pad at speed 4 with light to moderate pressure on a DA and you'll bring the finish to a new level before laying down your wax or sealant.Michael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
-
-
Interesting response about M205. I read soooooo many posts elsewhere that Menzerna SF4500 is the finish polish to use. I tought to myself. Self , what makes SF4500 so great?
Actually I am wanting to squeeze every ounce of shine out of my paint using a lc jewel pad. I thought I would need to use a different polish. There are polishes with less cut. Such as M9 or colorx.
Would either of these be a suitable finidh polis?Extreme Radiance Detailing
2001 C5 Corvette - Black
2010 LT2 Camaro - Victory Red
Comment
Comment