Please help!

[scroyal05]

I just finished detailing my car (yesterday) using the following steps:

1. Meguiars Quik Clay
2. Deep Crystal Paint Cleaner
3. Deep Crystal Polish
4. NXT Wax

After doing this, I treated the windows with Diamondite Glass Spray Clay, Cleaner and Sealer.

Well, this morning, I noticed there was some overspray from the glass products on the car so I tried to remove it with Quick Detailer. However, the product just smeared and I was not really able to remove it.

Any suggestions on how to remove I can remove this without detailing the car with the four steps above? I have learned my lesson to do the windows before doing the rest of the car.

Thanks.

[Tim Lingor]

Hey,

Depending what is in the cleaning component of the glass cleaner, you may need to re-wax those areas affected by overspray. The wax is probably just fine, but I would rather not take a chance when re-waxing is so fast.

I suggest re-washing and drying the whole car. Then re-apply the NXT Tech Wax to those areas. Otherwise, you should be fine!

Tim

[Mike Phillips]

If what Tim has suggested doesn't work, then try using the Deep Crystal Paint Cleaner over any affected areas, after that you'll have to re-wax those areas.

If that doesn't work, post back here.