Tweet
Good Day.....I have both compounds M8532 and M10532 but I'm not sure How to use and when to use M8532 with Cutting Pads(red pads) and M10532 with polishing pads(yellow pads)...I'm thinking to use M8532 with W7006 pad after to work with sanding paper or work with M10532 and W8006 pad without use sanding paper??? I'm very confuse with this decision...Thank you...
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: How to and When to use Compound M8532 and M10532???
I take it you have wet sanded and you now need to remove your sanding marks?
Are you working with a rotary?
If so a wool pad would be best along with m105. You should then follow up M105 with M205 and a polishing pad -
Re: How to and When to use Compound M8532 and M10532???
I'm sorry I forgot this detail....I have a Meguiars G110 and I do not have knowledge about What Compound use.....And I want to know the diference with M8532 and M10532....Comment
Comment