help with soft clear coat

[thepanchmx]

so i have polished this roof top (the black one) after m100 with mf system, and then m205 with finish w9000 pad speed 3,4,5 i have tried every speed, i still see those holograms.

products i have m83,m80,205,100,105.
pads: lc white, mf cut, w7000,w8000,w9000, wool, and soft 3m.

i have tried several combinations and nothing, maybe im doing wrong. Thank you

Any help pls?

https://www.facebook.com/media/set/?set=a.519749818039060.109872965.100000121409437&type=1&l=a1e6243381

thank you.

[Murr1525]

Re: help with soft clear coat

Well, assuming it has been good technique and everything, do you have some kind of cleaner/wax like #66/ColorX, etc?

[thepanchmx]

Nope just what i mentioned, do i have to do a second hand with mf or this is what mf system leaves? I have done the burgundy part with no haze at all but this one is hard as hell i cant

[Murr1525]

Re: help with soft clear coat

Well, it certainly can.

And M100 and MF Cut pad is a very aggressive combination, so it certainly could leave marring, even more so on soft paint.

Are you able to tell if the swirls/marring/holograms are from the M100/MF and are staying in place, or is the #205 moving things around and causing swirls itself?