• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Detailing a black Mercedes ML320 CDI

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Detailing a black Mercedes ML320 CDI

    Hi All,
    I have been a long time meguiars user and I love their products...

    I seek a bit of advise - particularly as I've never owned a black car before, and I know they can both show up dirt as well as scratches... so I don't want to screw it up, and as it is the wife's car, that goes double!

    My car is a Blue Subaru Impreza STi and my usual waxing regime is to wash it thoroughly (of course) using the NXT Gen Wash with a 2 bucket system, followed by a clay bar treatment... I then use a orbital buffer to apply the first coat of Deep Crystal Wet Look Wax waxed off by hand, then apply NXT Gen Tech Wax 2.0 for the second and final coat applied with a buffer, then waxed off by hand...

    The wifes new car - a ML320 CDI in Obsidian Black - it's a few years old and the paint is still in pretty decend condition with minor superficial swirls...
    Is the same process/products suitable for the Merc? or should I change to a different method or different products entirely?? I.e. the Ultimate Polish and Liquid Wax?? with a Swirl-X Treatment prior to Polish and Wax??

    Any help appreciated... I certainly don't want to do it wrong :P

    Regards,
    Matt

  • #2
    Re: Detailing a black Mercedes ML320 CDI

    Well let me be the first to say Welcome to MOL!!!

    Here is a link that will help you and give you plenty of answers for you.

    Rupes 21 / Flex 3401 / G110v2 / GG3"
    Thoryamaha919 AKA Evan
    Click and Like my Facebook Page

    Comment

    Your Privacy Choices
    Working...
    X