• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Water spots on monte carlo

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Water spots on monte carlo

    Here's the skinny..I own a 2003 Jeff Gordon Edition Monte Carlo which has decal flames on the hood. Yes it came from the factory that way!! Do I dare use UC or Scratch X on the decals? Do I just DA between them?

    Thanks in advance.

    Gary

  • #2
    Re: Water spots on monte carlo

    Probably best to avoid them, and be carefull with the DA around the edges.
    2017 Subaru WRX Premium - WR Blue

    Comment


    • #3
      Re: Water spots on monte carlo

      Keep the abrasive paint cleaners like UC and ScratchX off of the decals - tape off the edges if you have to. If the decals are glossy you can wax over them, and probably should. Just beware of wax residue along the edge of the decals. A soft toothbrush and a little Quik Detailer should clean that up if you do it right after waxing the car.
      Michael Stoops
      Senior Global Product & Training Specialist | Meguiar's Inc.

      Remember, this hobby is supposed to be your therapy, not the reason you need therapy.

      Comment

      Your Privacy Choices
      Working...
      X