Tweet
Hi, I want to remove the swirls on my car (white civic 03) and I recently bought the swirlX and the Ultimate Compund so, the thing is can I mix them and use them together or should I use the separatly?
Thanks.
Thanks.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: SwirlX and Ultimate Compound.
Separately.
You should do test spots with each product, but most likely will use UC for removing the swirls.
You may need to follow up with SwirlX if the UC left any marring, or can just save SwirlX for your mild cleaner next time.2017 Subaru WRX Premium - WR Blue -
Re: SwirlX and Ultimate Compound.
In the spring, I plan to use SwirlX on my cars as I detected some swirls.....Murr, would you not try the milder product 1st?
I plan to use SwirlX by DA"STRIFE" aka Phil
2005 Infiniti G35 Coupe (IP/ aka White) the Toy
2011 Subaru Impreza (SWP/ aka White) the DD
2017 Subaru Forester (CWP/ aka White) Wifey'sComment
-
Re: SwirlX and Ultimate Compound.
You really don't want to mix the two. Normally we would reach for the UC first (doing a test spot, of course!) but since this is a Honda Civic and we've seen so many of these with really delicate paint, we'd opt for the SwirlX for our initial test spot here.Michael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
Comment
-
Re: SwirlX and Ultimate Compound.
Like I said, test spots of both. You dont do the whole car with the milder product, and then find it didnt work.
But if working by hand, I would expect the UC.
Working by DA, SwirLX could be all you need then. Or maybe UC still.2017 Subaru WRX Premium - WR BlueComment
-
Re: SwirlX and Ultimate Compound.
Thanks! I will stick to your advices and let you know the results.
Thanks again!Comment
Comment