• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Ultimate Bonnet Uses????

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ultimate Bonnet Uses????

    Hi Everyone, I just have a few quick questions. Can I use an ultimate bonnet to remove pure polishes like DC2 and #7?? Can I use an ultimate bonnet for removing products like #83 and #80?? And finally how do I wash the ultimate bonnet??? Any help is greatly appreciated.
    Nothing but the best, That's why I use Meguiar's.
    1996 Lincoln Mark VIII LSC Dark Baltic Blue
    4.6 32 Valve DOHC V8

  • #2
    You can use our Ultimate Bonnets to remove products besides waxes. Unlike a coating of wax, which is supposed to be applied using a thin coating, sometimes other products are not as uniformly, or evenly applied and as such may be more difficult to remove if there is a lot of product on the surface. It just depends on how much product you used and how much residue is left behind.

    You wash them like a normal microfiber polishing cloth. That is in hot water with other microfiber products using laundry detergent. Dry as normal in a laundry dryer without any softeners.

    Meguiar's Ultimate Bonnets are reversible also so you can use both sides before switching to a new bonnet.
    Mike Phillips
    760-515-0444
    showcargarage@gmail.com

    "Find something you like and use it often"

    Comment


    • #3
      Thanks for the quick reply
      Nothing but the best, That's why I use Meguiar's.
      1996 Lincoln Mark VIII LSC Dark Baltic Blue
      4.6 32 Valve DOHC V8

      Comment

      Your Privacy Choices
      Working...
      X