Tweet
So I have never really corrected my entire paint. I have a set of LC pads but they are worn out. What pad sould I get to use with my PC XP? Btw, I have 205 and UC. Should I get the yellow one for the best correction pad with UC/M205?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: which meguiars pad?
-
Re: which meguiars pad?
We highly recommend using our W68DA backing plate with our Soft Buff 2.0 pads, and it will mount to the 7424XP buffer just fine. It was designed to work with these pads, offering plenty of flexible support to the outer reaches of the pad, which in turn yields more uniform cutting across the face of the pad.
With UC you would use the W8207 yellow polishing pad at speed 5 - at least two or three for a full correction - and then follow with a W9207 black finishing pad at speed 3-4 with the M205 to refine the finish, increasing clarity and gloss. Switch to a fresh W9207 at speed 3 to apply your wax/sealant.Michael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
Comment
Comment