How much product to use ?

[SunnyD]

i think im using too much of everything i got some uc probably 3 weeks ago and ive only used it about 4 times or so and almost a quarter of the bottle is gone i got the clay kit and first use with clay i used nearly all of the qd bottle im i using too much product im getting a g110v1 tomorrow so when i start using that i think i might put on way too much basically how much is too much on a da pad and by hand

[Murr1525]

Re: How much product to use ?

What have you been using the UC on?

Clay can take 1/2 to 3/4 of a small QD bottle if the surface is dirty.

[SunnyD]

Re: How much product to use ?

The surface wasn't that dirty uc was on a 2 x 4 panel I made and did some custom paint on and a small area on my car

[Murr1525]

Re: How much product to use ?

Going with your other thread, can always look into Last Touch or Final Inspection if you will be needing more Lube, light dust remover, etc.

The UC is hard to say... what takes 3 passes by hand might take one by DA, so you'll save product there. Still want to focus on about 2x2 foot squares if doing defect removal by DA.

You would do a bead around the outside of the pad, dab it on the paint in 2-3 spots, then work it over the area.

[SunnyD]

Re: How much product to use ?

Thanks for the info