• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

wax for a new car

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • brendan1234
    replied
    Re: wax for a new car

    it is a 2011 black mica mazda 3 hatchback

    brand new!

    although the paint lacks luster and seems flat probably from sitting outside dealer lot

    Leave a comment:


  • brendan1234
    replied
    Re: wax for a new car

    Originally posted by Murr1525 View Post
    Well, what kind of car is it?

    In general, if you want the swirls out, you will need to do something like:

    1. Wash - Gold Class Wash, 2 buckets, good towels, mitt, etc
    2. Clay - Smooth Surface Clay kit
    3. Clean - Ultimate Compound & Ultimate Polish
    5. Wax - Nxt 2.0 or Ult. Wax. 2 thin coats are best.

    6. Maintain - UQW after future washes.

    But a fair bit of effort is needed to remove swirls by hand. Best not to plan on more than a panel or two a day. You have to work the product in, not just spread it around. Always do a test spot first, dont do the whole car and find out it didnt work or soemthing.
    Thanks, (I have the 3 step, can I replace the "ultimate compound" with the step 2 polish?)

    1. wash - ultimate wash and wax
    2. step 1 paint cleaner (but it's new car, so i think i might skip this)
    3. step 2 polish
    4. wax nxt 2.0 or ult wax

    what is UQW?

    Leave a comment:


  • Murr1525
    replied
    Re: wax for a new car

    Well, what kind of car is it?

    In general, if you want the swirls out, you will need to do something like:

    1. Wash - Gold Class Wash, 2 buckets, good towels, mitt, etc
    2. Clay - Smooth Surface Clay kit
    3. Clean - Ultimate Compound & Ultimate Polish
    5. Wax - Nxt 2.0 or Ult. Wax. 2 thin coats are best.

    6. Maintain - UQW after future washes.

    But a fair bit of effort is needed to remove swirls by hand. Best not to plan on more than a panel or two a day. You have to work the product in, not just spread it around. Always do a test spot first, dont do the whole car and find out it didnt work or soemthing.

    Leave a comment:


  • brendan1234
    replied
    Re: wax for a new car

    yes I would like them out

    Leave a comment:


  • Murr1525
    replied
    Re: wax for a new car

    Do you want the scratches out? Lot more effort if you do.

    Leave a comment:


  • brendan1234
    started a topic wax for a new car

    wax for a new car

    what wax should I buy for a new car? Although the car has been sitting outside for a long time...it was really dusty when they brought it into the dealership...the salesman said they would “prep” it for me, but I think he just sent it through an automatic car wash...I see scratches on the paint...


    I was thinking of getting the liquid ultimate wax as the first coat on a new car? is that ok?


    The choices out there are really confusing me, do i need a paint cleaner wax...then a polish...then finally a Wax?


    Or can I just do it all in one step with the liquid ultimate wax?

    The paint is pretty clean since it’s a new car...and not too rough....even though i’m pretty sure it’s been sitting outside for quite some time on the lot....
Your Privacy Choices
Working...
X