Tweet
Where does DC #2/ A-21 fall on the recommended pad & speed chart?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
CL9,
Personally, I find the DC2 to fall in the "Pure Polishes" category with #3, #5, #7, and #81.
Mike will be able to tell you better.Boss_429 -
Re: Dc #2
A2116 is a non-abrasive pure polish and can be applied using the 2.0 to 4.0 setting with either a W-8006 polishing pad or a W-9006 finishing pad.Originally posted by CL9 Nyte Ryder
Where does DC #2/ A-21 fall on the recommended pad & speed chart?
At our Saturday Classes we usually apply it at the 3.0 setting with a W-8006 foam polishing pad after first cleaning the finish.
MikeComment
-
Can you buy single 8006 or 9006 pads from Meg's?Comment
-
Yes, but the better deal is the pad kit.Originally posted by CL9 Nyte Ryder
Can you buy single 8006 or 9006 pads from Meg's?
Set of 3 pads - WDAV99-B
$24.95Comment
Comment