Tweet
i just bought a 2011 chevy cruz . it's white and after it rains i'm sure everyone seen this sometimes it gets black dirt on the sides. i was wondering do i have to rinse it off first, or can i just use UD and wipe it down without scratching my clear coat?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: question about quick detailer
Quick detailers are mostly used for light dust removal. If you have some contaminants it's better to remove them first to ensure scratch-free experience.
Car duster can help as well before QD application. -
Re: question about quick detailer
As long as the surface is relatively clean (light dusting and water spotting ok) QD will be your choice to clean the surface. If you wait more than a day or two after a rainshower and the vehicle is driven alot a QD wipedown will induce some swirls. If you dont have time for a wash you can follow the wipedown with some quik wax to help hide the swirls untill you have time for a proper wash and detail.Practice doesn't make perfect, the dedication to achieve perfection makes perfect. "Smack"
2011 Jet Black 328i Touring
2007 Jet Black 335i SedanComment
-
Re: question about quick detailer
thank you very much for your replys guys. the way the black spots on the side 0of the car looks , i'll rinse it down with just water then detail her on the wk'end. thanks a lot again!
budd.
Comment
Comment