anyone know of a legit place i can buy the g110v2 for a decent price.?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
help?
Collapse
X
-
Re: help?
i have a question... i bought the w68 backing plate for the gg6 going to be using with softbuff 2.0 7 inch pads
1 cutting,and a few polishing n few finishing to start
ima be using it for my car,family car.friends cars.basically a side job.
ima be getting ultimate compound as of now and nxt gen 2.0 wax
but my question is would swirl x finish up nicely like m205? swirl x is a polish right?it has less cut then 205 or more???
or what can i use to finish up besides that?any good product that i would be able to get at an autozpart store?Don't get so caught up making a living that you forget to make a life.
Comment
-
Re: help?
You would want to follow up the ultimate compound with the swirl x if there is any hazing left behind or you want a little more clarity out of your paint. I believe swirl x is more aggressive than M205, but should finish up quite nicely. You can also adjust how aggressive you are with the swirl x based on using a polishing or finishing pad for it.
Here is an article that might help you out with the order of aggressiveness of SMAT products:
I once put swirls in my paint just to see what it looked like.
I don't always detail cars, but when I do, I prefer Meguiar's.
Remove swirls my friends.
Comment
-
Re: help?
Not sure if you still need it or not, but Las Vegas Car Care sells a lot of our products. http://www.lasvegascarcare.comRick McDonough
Customer Engagement - Digital Content Editor
Meguiar's Inc.
1.800.854.8073 * 3853
rmcdonough@meguiars.com
Comment
Comment