Tweet
Re: confused about what to use....
I agree... Moisturizing is probably a good idea once in a while, but needs cleaned off well after.
I agree... Moisturizing is probably a good idea once in a while, but needs cleaned off well after.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
2017 Subaru WRX Premium - WR Blue -
Re: confused about what to use....
thing is, will QID clean OFF M40 or will it only add to it, it almost seems id have to APC the seat and THEN apply QID but im not sure.Zach Hall
2001.5 Dodge Ram 2500 Cummins Diesel - DD/Tow rig
1983 Chevy C10 - Race/Show rig
1939 Dodge D11 Luxury Liner Deluxe - Antique resto. projectComment
-
Re: confused about what to use....
QID has mild cleaners that will remove any buildup on the surface of M40. M40 is not like UP where it bonds to the finish so any extra M40 can be removed much easier.Tedrow's Detailing
845-642-1698
Treat Yourself to that New Car FeelingComment
-
Re: confused about what to use....
so your saying its safe to M40 it and then follow up with QID?Zach Hall
2001.5 Dodge Ram 2500 Cummins Diesel - DD/Tow rig
1983 Chevy C10 - Race/Show rig
1939 Dodge D11 Luxury Liner Deluxe - Antique resto. projectComment
-
quality creates its own demandComment
-
Re: confused about what to use....
A healthy dose of QD....2017 Subaru WRX Premium - WR BlueComment
-
Re: confused about what to use....
I would try M40 and then let it sit overnight outside and then wipe off all excess very slowly with a white terry cloth.
I have a feeling the QID will smear around the freshly applied M40.Nick
Tucker's Detailing Services
815-954-0773
2012 Ford Transit ConnectComment
-
Re: confused about what to use....
well i applied M40 yesterday morning and its been on ever since. I think what ill do is use APC+ to remove the M40 before i ride, then after APCing the seat ill apply QID. That should work ok shouldnt it?Zach Hall
2001.5 Dodge Ram 2500 Cummins Diesel - DD/Tow rig
1983 Chevy C10 - Race/Show rig
1939 Dodge D11 Luxury Liner Deluxe - Antique resto. projectComment
-
Re: confused about what to use....
I am getting confused. If you already cleaned the seat with apc, then applied #40. Why not just wipe off the excess of 340 and see if it going to be too slick to ride. If it is okay, then you saved yourself a few steps. If it is too slick after the wipe down. Then proceed with your plan.Originally posted by CumminsCrazed View Postquality creates its own demandComment
-
Re: confused about what to use....
no no, i have not used APC on the seat at all yet, it was already clean and i dressed it with M40Zach Hall
2001.5 Dodge Ram 2500 Cummins Diesel - DD/Tow rig
1983 Chevy C10 - Race/Show rig
1939 Dodge D11 Luxury Liner Deluxe - Antique resto. projectComment
-
Re: confused about what to use....
A properly applied and wiped off coat of M40 shouldn't be leaving behind so much product that the surface becomes really slippery. Besides, once you start pushing that sled a bit you'll want to be able easily shift your body weight from side to side.
Our call center receives two kinds of calls from motorcycle riders looking for something to use on their saddles - Harley riders who want nothing slippery in the least, and sport bike riders who want a bit of slip so they can slide back and forth and drag the appropriate knee during canyon runs.
But seriously, M40 properly wiped off won't leave a really slippery surface.Michael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
Comment
Comment