My 1st time

[Dice13]

Re: My 1st time

What is the difference between glaze and polish, the NXT I mentioned above is not a glaze or is it. On a White car what would give it the best wet look I will be yellow waxing last , what should go right before the final wax.

[Chris Thompson]

Re: My 1st time

Many times "polishes" have very very tiny amounts of abrasives along with polishing oils. A glaze is basically a pure polish. It is 100% polishing oil that is made to nourish the paint. It is also able to hide light defects.
No, NXT is not a glaze or polish. It is a wax.
A glaze is an excellent choice to use before wax.

[Dice13]

Re: My 1st time

OK NXT goes back to store, I want to use the yellow #26 paste even though I am not sure which will give me a richer glossy shine with my white car.. What glaze can I use with the #26 paste wax, so glaze works with any wax.

Just to clear this up 1- wash, 2 clay, 3- wax cleaner, 4 -glaze ,5-wax

On a new car that dont have many swirls from what I can see right now should I use the wax cleaner only where I see any swirls after claying. What would be best swirl remover for a new car as your oppinion. OK I know I am almost getting this.

I
you guys for getting me through this. I always dreamed of an M3 and just want to get this right. I can't mess up a 80 k car I would be heart broken and have a bigger problem with my wife. I will say 1 thing for sure there are some very helpful caring people on this site. The BMW M3 forums were awesome also.

[HealthyCivic]

Re: My 1st time

Best thing for removing swirls on a new car would likely be SwirlX unless the swirls are real bad. You might want to take a look at this article as well.

[Dice13]

Re: My 1st time

Guys I gonna give it a wirl not a swirl today. I will wash and dry car carefully with Megs shampoo, I will then will use Megs QD spray-clay kit. If I see no swirls in the car like I did not before the ones I put in it real light. I will use Megs color x in those 2 spots I see without doing whole car. Then I will go to glaze car with Megs #7 i think wife just got me then go right to Megs #26 solid paste. Do you think I am missing anything,could it be I dont do a cleaner wax, How many waxes can I put on this car brand new,glaze, paste #26, a cleaner wax would be overkill as a trird wax before the other 2 processes

[HealthyCivic]

Re: My 1st time

Guys I gonna give it a wirl not a swirl today. I will wash and dry car carefully with Megs shampoo, I will then will use Megs QD spray-clay kit. If I see no swirls in the car like I did not before the ones I put in it real light. I will use Megs color x in those 2 spots I see without doing whole car. Then I will go to glaze car with Megs #7 i think wife just got me then go right to Megs #26 solid paste. Do you think I am missing anything,could it be I dont do a cleaner wax, How many waxes can I put on this car brand new,glaze, paste #26, a cleaner wax would be overkill as a trird wax before the other 2 processes

Choose a cleaner wax and then put a wax after that. I wouldn't do 3 different waxes on the car, there's not much point. And don't do #7, #26, and then cleaner wax because then you'll remove #26 and #7. Basically, do not use anything with "cleaner" in it after you put a coat of wax on.

[Dice13]

Re: My 1st time

Can I put #7 glaze on car for tonight and then put the #26 paste on tomorrow I wont have the time to do both tonight.

[Murr1525]

Re: My 1st time

Sure.

Just QD tomorrow first if needed, gets dirt/dusty.