Foam or Micro-Fiber??

[MrWaxer]

Here's my question..I have both micro-fiber pads and Meg's foam pad's..I was thinking of apply NXT 2.0 with foam and removing with micro-fiber..Will this make a difference??

[Shawn T.]

Re: Foam or Micro-Fiber??

Apply with foam pad and remove with microfiber towel, not microfiber pads.

[MrWaxer]

Re: Foam or Micro-Fiber??

Yeah I don't know what I was thinking.. I think what I meant was applying with foam or micro-fiber..

[Shawn T.]

Re: Foam or Micro-Fiber??

Definitely apply with foam, unless you know that your paint will not mar with microfiber applicators and that you are using high quality microfiber applicators.

[MrWaxer]

Re: Foam or Micro-Fiber??

Yeah that's what I always do..I was just curious..The micro-fibers aren't Meg's...

[Bill Davidson]

Re: Foam or Micro-Fiber??

Yeah I don't know what I was thinking.. I think what I meant was applying with foam or micro-fiber..

You can use either one, they are both good. The Meguiar's Even Coat Applicator Pads provide a larger surface area and Meguiar's claims they are even gentler than a foam pad.

Which ever pad you use, just try to keep you fingers flat on the pad so you don't create pressure points.

Apply ultra thin coat of wax. After the wax is fully dry, then use a microfiber cloth to remove the wax.

[Murr1525]

Re: Foam or Micro-Fiber??

I like foam more for applying things.

[J. A. Michaels]

Re: Foam or Micro-Fiber??

I would also go with the foam.

[MrWaxer]

Re: Foam or Micro-Fiber??

I think I'll stick with the foam..Has always worked in the past..

[MrWaxer]

Re: Foam or Micro-Fiber??

You can use either one, they are both good. The Meguiar's Even Coat Applicator Pads provide a larger surface area and Meguiar's claims they are even gentler than a foam pad.

Which ever pad you use, just try to keep you fingers flat on the pad so you don't create pressure points.

Apply ultra thin coat of wax. After the wax is fully dry, then use a microfiber cloth to remove the wax.

I knew all that..I was just thinking of changing the pads I use..

[Bunky]

Re: Foam or Micro-Fiber??

I think foam is much safer and easier to use (less drag). I had a bad experience with one mf once (thought it marred my paint) and never used them again. I use the mf applicators on the interior surfaces.

[zaidgreat]

Re: Foam or Micro-Fiber??

IME, foam spreads better on paint and seems to give a more even coating compared to mf pad.
But i dun mind using mf with liquid based waxes.....

[pmcjr]

Re: Foam or Micro-Fiber??

I always remove wax with a flannel cloth. Over time they get softer and softer and will not scratch or mark the paint surface.

[Fly Bye]

Re: Foam or Micro-Fiber??

I always remove wax with a flannel cloth.

You use your jammys

[Poki]

Re: Foam or Micro-Fiber??

I like using the MF pads to apply Ult. Protectant and Supreme Shine. Then I place the saturated pad in a zip lok baggy marked with the product...for the next time use. Less pad washing and streeeetches the product since it takes so little of each of these to do the job.