Just purchased the ADS Meguiar's G110v2 Six Pack Special (4 Yellow Pads & 2 Black Pads) and needless to say, I'm pumped.
My subject will be my Black 2002 Z71 Tahoe; I'm revamping it with new wheels and tires (18" XD Monsters w/ 35" Nitto Trail Grapplers M/T), so I thought I'd better jump on detailing the beast and give it a "fresh" start...not to mention the swirls are starting to get on my nerves.
After researching, I'm thinking my Plan of Action will be as follows:
Step 1 & 2: Extensive Wash & Clay Bar
Step 3: Ultimate Compound - Applied w/ G110v2 (Yellow Pad w/ 6 Passes Per Section)
Step 4: Swirl X - Applied w/ G110v2 (Yellow Pad w/ 6 Passes Per Section)
Step 5: Liquid Glass - Applied and Buffed Off by Hand
I'm NOT experienced in hardcore detailing like most of you so...
*What SPEED setting do I need to use during Steps 3 & 4 on the G110v2?
*Would Liquid Glass in Step 5 work as a solid substitute for NXT 2.0 Wax?
*Should I apply the wax (LG OR NXT) with the G110v2 and a Black Pad (Buffed by Hand)?
I really appreciate any feedback and feel free to suggest a different plan of action if need be; I'm a detailing virgin, but I'm excited (and a little nervous) about my first time...LOL. Thanks a ton!

My subject will be my Black 2002 Z71 Tahoe; I'm revamping it with new wheels and tires (18" XD Monsters w/ 35" Nitto Trail Grapplers M/T), so I thought I'd better jump on detailing the beast and give it a "fresh" start...not to mention the swirls are starting to get on my nerves.
After researching, I'm thinking my Plan of Action will be as follows:
Step 1 & 2: Extensive Wash & Clay Bar
Step 3: Ultimate Compound - Applied w/ G110v2 (Yellow Pad w/ 6 Passes Per Section)
Step 4: Swirl X - Applied w/ G110v2 (Yellow Pad w/ 6 Passes Per Section)
Step 5: Liquid Glass - Applied and Buffed Off by Hand
I'm NOT experienced in hardcore detailing like most of you so...
*What SPEED setting do I need to use during Steps 3 & 4 on the G110v2?
*Would Liquid Glass in Step 5 work as a solid substitute for NXT 2.0 Wax?
*Should I apply the wax (LG OR NXT) with the G110v2 and a Black Pad (Buffed by Hand)?
I really appreciate any feedback and feel free to suggest a different plan of action if need be; I'm a detailing virgin, but I'm excited (and a little nervous) about my first time...LOL. Thanks a ton!
Comment