• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Glaze vs polish

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Glaze vs polish

    What the difference between a glaze and polish

    These for example M05 show car glaze, what condition would you use this vs

    M80 speed glaze, whats it intended use?

    And these products against M83 dual action cleaner/polish

    Just trying to figure out if these are for me.

  • #2
    Re: Glaze vs polish

    Glazes have fillers, which are useful for hiding paint defects such as scratches and swirls, and giving your paint a really nice glossy finish. But as soon as the glaze wears off, the paint defects reappear.

    Cleaner polishes (as with the examples you provided) have microscopic abrasives intended to abrade your paint - in effect, removing paint defects as opposed to hiding them. Each cleaner polish has a cut level ranging from light to heavy and all points in between, and most are effectively applied with a machine polisher, although most can be applied by hand as well.

    Comment


    • #3
      Re: Glaze vs polish

      Unless you have a single stage paint pure polish will probably not give you a difference in your cars appearence. It's up to you never hurts to give it a try and maybe it will make a noticeable difference to you. Just my experience.

      Comment


      • #4
        Re: Glaze vs polish

        Great, thanks!
        So what is the best product to apply by hand for light swirl marks? Seems like SwirlX is a good one. Then I would follow that up with a pure polish then something like NXT?

        Comment


        • #5
          Re: Glaze vs polish

          Pure polishes make a difference on all colors and paint types. If you really want to make a light colored car pop, apply a coat of polish. Clearcoat is paint. All paint benefits from polish. This is, of course, just my opinion.

          Colin
          A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.

          Comment


          • #6
            Re: Glaze vs polish

            Originally posted by Jeff120 View Post
            Great, thanks!
            So what is the best product to apply by hand for light swirl marks? Seems like SwirlX is a good one. Then I would follow that up with a pure polish then something like NXT?
            SwirlX is a great choice for light swirl marks (hence the name ). It's not necessary to follow that with a pure polish, although some opt to do so. Actually, what many here like to do is follow an application of SwirlX with Show Car Glaze M07, then sealed with either M21 or the more commercially available NXT 2.0, which is virtually the same product.

            Comment


            • #7
              Re: Glaze vs polish

              I just finished my Dad's 09 Forrester in the last half hour. I used 105 on certain spots, 205 all over followed by #7 and then NXT 2.0. In my eyes the #7 made a huge difference. It gave the paint a glow that was amazing!
              Pics to come tomorrow.

              Comment

              Your Privacy Choices
              Working...
              X