Tweet
How long to work M80 speed glaze
Hi everyone, I've been trying to find some info on how exactly to use M80 speed glaze. Been doing research on the web, but to no avail. I'm assuming it is DAT technology, and not SMAT, but I'm not sure. Do you know which one it is, and about how long the working time is while polishing? And does it dust up a lot like I hear Megs 105 does? I appreciate any input you could give me. I'll be using it with a white CCS pad on my Flex 3401.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: How long to work M80 speed glaze
M80 is DAT technology, you are correct, therefore the abrasives diminish as you are polishing. It is a very easy product to work with based on my experience with it. The white CCS pad should be fine, it will give you mild correcting ability. You basically need to polish until the residue is almost clear then wipe off. -
Re: How long to work M80 speed glaze
Thanks 96Lude, I appreciate your help!Originally posted by 96Lude View Post
Comment
-
Re: How long to work M80 speed glaze
Glad I could be of assistance. Let us know how it goes.Comment
Comment