• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

switching from M80 to M205 using G100 and W-8006 pad?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    switching from M80 to M205 using G100 and W-8006 pad?

    I am thinking of using M205 this spring instead of M80. My finish is in good shape and M80 would be fine as it has been in the past for "spring cleaning", but since I need to buy more I figured I'd try M205 instead.

    I have the older G100 that I've used in the past with M80, a W-8006 yellow 6 1/2" pad at speed 5. Is that pad speed combination correct for using M205?
    Tags: None
  • #2
    Re: switching from M80 to M205 using G100 and W-8006 pad?

    It should work just fine. Do a test spot and see how many passes are needed with 205. If it is minor swirls, you may not need very many passes, but if they're medium, it may require some more passes (the same goes for all the smat products).

    I once put swirls in my paint just to see what it looked like.
    I don't always detail cars, but when I do, I prefer Meguiar's.
    Remove swirls my friends.

    Comment

    • #3
      Re: switching from M80 to M205 using G100 and W-8006 pad?

      Seems right to me. I have used it this way on my G110 and G100.
      quality creates its own demand

      Comment

      Previous template Next
      Your Privacy Choices
      Working...
      X