Tweet
I'm new hope I'm not stepping out of line to bad but my Trailblazer's grey carpet needs serious hep. The badf part is it seems to be mostly sand and mud. Any ideas.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Help
A picture or a little more description would be helpful. What tools/ equipment do you have available? -
Re: Help
Start with a good vacuuming. Before you run the vacuum, use a stiff bristle brush to break up and loosen the dirt.
If the carpet is still dirty, lightly spray it with APC (All Purpose Cleaner) and dip the brush in some hot water and scrub the carpet with the wet brush. Then use a wet dry vac to draw up as much of the moisture as you can. Rub a clean, dry terry towel over the carpet to dry the majority of what ever is left over. If the carpet is still a bit damp, leave your windows cracked to vent the car.Comment
-
Re: Help
William has provided an excellent general way to start if you have commonly available tools and products. If you have some other items available, Blazin, post that info and we may be able to refine that process a little.Comment
Comment