• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Windshield sheeting water...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Windshield sheeting water...

    Hopefully it doesnt go too badly once the RainX wears off, but if you keep up with it should be ok...

    I have had good luck with RainX removing water spots, etc, so it does a little on its own as well.
    2017 Subaru WRX Premium - WR Blue

    Comment


    • #17
      Re: Windshield sheeting water...

      Clean the windshield with Stoners Invisible Glass, clay, SIG again, then Klasse AIO.
      BobbyG

      Comment


      • #18
        Re: Windshield sheeting water...

        I just clay bared with windsheild and it seems to bead pretty nice. I have a rain sensor for my wipers, and its recommended not to use anything on the windshield if you do, as it can interfere with the rain sensor. So just make sure if any of you have a similar setup its probably best not to put RainX or UQW or anything on.

        Comment


        • #19
          Re: Windshield sheeting water...

          Originally posted by Murr1525 View Post
          Hopefully it doesnt go too badly once the RainX wears off, but if you keep up with it should be ok...

          I have had good luck with RainX removing water spots, etc, so it does a little on its own as well.
          I think it should be fine from here. Before even applying the RainX, it started to bead a little, but it had some soap residue on it still as well. The BKF followed by the Vinegar/IPA worked very well! We shall see!

          Thanks for all of the suggestions my fellow MOL'ers!

          Comment

          Your Privacy Choices
          Working...
          X