• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

First Detail please help....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • First Detail please help....

    I just try my first meguiars product and wow im amazed on how well scratch x works on bird dropping u can hardly see it after 1 pass i will probably do 2 more i try to do it with a MOC medium compound and it *****, it did not remove it at all. My next question is i want to detail my car now using meguiars product so i bought DEEP CRYSTAL® SYSTEM PAINT CLEANER,SHOW CAR GLAZE and NXT GENERATION TECH WAX® 2.0 PASTE i also have microfiber towels,applicator pads,clay bar and a porter cable DA polisher. how would u recommend me to apply these products by hand or with the porter cable i have use the porter cable before on my old car with cheap products i also want to know if the product that i bought will do my paint is in very good conditions i want to first clay the car then apply
    DEEP CRYSTAL® SYSTEM PAINT CLEANER
    DEEP CRYSTAL® SYSTEM PAINT CLEANER
    DEEP CRYSTAL® SYSTEM PAINT CLEANER then SHOW CAR GLAZE and than the wax. please help me i dont want to mess my paint like i seen some pics in the forums Thanks.....

  • #2
    Re: First Detail please help....

    Welcome to MOL

    How/why in the world did you make your post so wide?

    First to help you out, go to the site navigation and read through the post that will help answer alot of your questions and more.

    Also I highly recommend you get this dvd, it will help you a great deal!
    ''USE THE LEAST AGGRESSIVE PRODUCT TO GET THE JOB DONE RIGHT''
    You Don't Know What You Can Do Until You Try '' TECHNIQUE IS EVERYTHING''
    Test Hoods Are Cheap And Most Of The Time Free

    Comment


    • #3
      Re: First Detail please help....

      sorry i didn't mean to make that big i just dont want to mess my car up.

      Comment


      • #4
        Re: First Detail please help....

        Yeah,
        1. Wash
        2. Clay
        3. Clean - DC Paint Cleaner
        4. Polish - Show Car Glaze
        5. Wax - Nxt
        6. Wax - 2 thin coats are best

        is the right process, whether by hand or machine.

        If you were to work by machine, you might really like #80 or #205 as well.

        What pads ,etc do you have to use with the PC? Also, that DVD is fantastic, it is definately a must-have.
        2017 Subaru WRX Premium - WR Blue

        Comment


        • #5
          Re: First Detail please help....

          This is my overall genera procedure including some product recommendations from wash, through paint correction to wax.

          • Wash
          • Dry
          • Clay
          • Swirl Remover – Meguiar’s M105
          • Finishing Polish – Meguiar’s M205
          • Finishing Polish – Menzerna Polish PO85RD
          • Isopropyl Alcohol Clean
          • Paint Glaze – If you choose to, Wolfgang Finished Glaze
          • Seal - Wolfgang Deep Gloss Paint Sealant
          • Wax - Collinite 845, Pinnacle Liquid Souverän Wax, Griot’s Best Show Wax
          BobbyG

          Comment


          • #6
            Re: First Detail please help....

            thanks man u guys have been very helpful.

            Comment


            • #7
              Re: First Detail please help....

              Try this as well

              Meguiar's 5-Step Paint Care Cycle - Updated!

              Comment

              Working...
              X
              gtag('config', 'UA-161993-8');