• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Pure Polish after Nxt Gen wax 2.0

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Pure Polish after Nxt Gen wax 2.0

    I have a black car that ive been using nxt gen 2.0 wax, which i apply about once a month. I want to try deep cystal pure polish to see if i can make it that bit better.

    My question is, do i need to remove the nxt gen wax 2.0 before applying the polish or can i simply polish, then re-apply the nxt gen wax?

  • #2
    Re: Pure Polish after Nxt Gen wax 2.0

    I dont think you will run into any problems if you apply Deep Crystal Polish , then re apply your NXT Generation Tech Wax.
    Nick
    Tucker's Detailing Services
    815-954-0773
    2012 Ford Transit Connect

    Comment


    • #3
      Re: Pure Polish after Nxt Gen wax 2.0

      u know i was going to make the same thread, expect i was going to use m07, i wanted to know if after i wash and clay, if i was to put down m07 then a coat of nxt2.0 then let it cure they add another coat of m07 and then the second coat of nxt, would it make a difference from just one coat of m07 and then 2 coats of nxt?

      Comment


      • #4
        Re: Pure Polish after Nxt Gen wax 2.0

        Originally posted by 79elcamino View Post
        u know i was going to make the same thread, expect i was going to use m07, i wanted to know if after i wash and clay, if i was to put down m07 then a coat of nxt2.0 then let it cure they add another coat of m07 and then the second coat of nxt, would it make a difference from just one coat of m07 and then 2 coats of nxt?
        I would do this:

        Wash
        clay
        M07
        NXT 2.0 ~ two thin coats


        I hope this helps.
        Nick
        Tucker's Detailing Services
        815-954-0773
        2012 Ford Transit Connect

        Comment


        • #5
          Re: Pure Polish after Nxt Gen wax 2.0

          Originally posted by Tuck91 View Post
          I would do this:

          Wash
          clay
          M07
          NXT 2.0 ~ two thin coats


          I hope this helps.
          Yes, this is the way to go. M07 is going to yield max results when applied to well prepared, "naked" paint. If you want to apply multiple coats of M07 then you should do so one on top of the other, then apply a wax. But in all honesty, unless you've got very, very nice single stage paint of a dark color, you probably won't notice much of a difference with two coats of M07. You will obtain maximum results overall by removing all above surface contaminants and below surface defects first, making the paint as smooth and flat as possible, than you will from applying a pure polish to a less than beautiful finish.
          Michael Stoops
          Senior Global Product & Training Specialist | Meguiar's Inc.

          Remember, this hobby is supposed to be your therapy, not the reason you need therapy.

          Comment

          Your Privacy Choices
          Working...
          X