• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Deep Crystal Polish, how old??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Deep Crystal Polish, how old??

    Just out of curiousity, I was wondering how old is the DC2 polish formula, has it been changed over the years?, becaus i seen a pic of it somwehere on this site, and it looked pretty old

  • #2
    Re: Deep Crystal Polish, how old??

    The specific Deep Crystal Step 2 Polish part number dates back almost 20 years, as does the rest of the DC system. But it is derived from M07 Show Car Glaze, which dates back 50 some odd years. There may have been a few minor formulation tweaks here and there to meet changing environmental regulations, but by and large these and other products remain unchanged.

    You know the old saying, "if it ain't broke, don't fix it".

    While many products enjoy huge popularity for decades - like M07 and many others in the Mirror Glaze line - we will phase out a product for a variety of reasons, whether it be slow sales, regulation changes that would require so great a formulation change as to seriously alter a products performance, or the development of a new technology that renders a product obsolete.
    Michael Stoops
    Senior Global Product & Training Specialist | Meguiar's Inc.

    Remember, this hobby is supposed to be your therapy, not the reason you need therapy.

    Comment


    • #3
      Re: Deep Crystal Polish, how old??

      It honestly doesn't need to change. I have used this as my only buffing step on a car and the results ( If you clayed it) is pretty amazing. It leaves a wet, glossy look.
      Meguiars=FTW

      HMD - 2nd Year & Running Strong

      Comment


      • #4
        Re: Deep Crystal Polish, how old??

        Originally posted by Michael Stoops View Post
        The specific Deep Crystal Step 2 Polish part number dates back almost 20 years, as does the rest of the DC system. But it is derived from M07 Show Car Glaze, which dates back 50 some odd years. There may have been a few minor formulation tweaks here and there to meet changing environmental regulations, but by and large these and other products remain unchanged.

        You know the old saying, "if it ain't broke, don't fix it".
        Is anyone privy to the actual differences between DC2, 5, and 7? As you know I'm really excited about my #7, but notice that 5 is suggested for humid conditions. Haven't seen any fogging of my 7 though, and it's about as humid as it gets here in Florida at the moment...
        "If we knew what we were doing, it wouldn't be called research would it? (Albert Einstein 1879-1955)
        BOB

        Comment


        • #5
          Re: Deep Crystal Polish, how old??

          Originally posted by RGP View Post
          Is anyone privy to the actual differences between DC2, 5, and 7? As you know I'm really excited about my #7, but notice that 5 is suggested for humid conditions. Haven't seen any fogging of my 7 though, and it's about as humid as it gets here in Florida at the moment...
          The folks privy to the actual differences would be our chemists.

          If M07 was giving you problems in a high humidity area then we would recommend moving to M05, but if you're having great success (and we know you are!) then just stick with the Show Car Glaze.

          For the record though, DC2 was formulated as a consumer product so it should be a bit easier to apply that M07. Overall, however, it isn't quite as rich in polishing oils as M07 is.
          Michael Stoops
          Senior Global Product & Training Specialist | Meguiar's Inc.

          Remember, this hobby is supposed to be your therapy, not the reason you need therapy.

          Comment


          • #6
            Re: Deep Crystal Polish, how old??

            I've been going back and forth in my head trying to decide between trying DC2 and #7. As a newbie to detailing, #7 scares me because I've heard it's so finicky and can be difficult to use. I've also heard that DC2 gives a similar look but is easier to apply. With that said, a few questions:

            1. Should I be "afraid" of #7?

            2. How similar is the look of DC2 compared to #7? How much easier is it to use?
            Anybody can make a car look good with the right products.

            Comment


            • #7
              Re: Deep Crystal Polish, how old??

              Originally posted by StoneRaizer View Post
              I've been going back and forth in my head trying to decide between trying DC2 and #7. As a newbie to detailing, #7 scares me because I've heard it's so finicky and can be difficult to use. I've also heard that DC2 gives a similar look but is easier to apply. With that said, a few questions:

              1. Should I be "afraid" of #7?

              2. How similar is the look of DC2 compared to #7? How much easier is it to use?
              Go for it. Reread my description. There "ain't" nothin' to it!!! I read all kinds of ridiculous tutorials about how it "skims over" and you then gotta re wipe things. That's bunk. It's as easy as I described. It's not wet after you remove it at all. I simply don't know where folks get these wacky bits of information. It's just like applying anything else. Apply, rub around a bit and remove.
              "If we knew what we were doing, it wouldn't be called research would it? (Albert Einstein 1879-1955)
              BOB

              Comment


              • #8
                Re: Deep Crystal Polish, how old??

                Originally posted by RGP View Post
                Go for it. Reread my description. There "ain't" nothin' to it!!! I read all kinds of ridiculous tutorials about how it "skims over" and you then gotta re wipe things. That's bunk. It's as easy as I described. It's not wet after you remove it at all. I simply don't know where folks get these wacky bits of information. It's just like applying anything else. Apply, rub around a bit and remove.
                BoB,I think the reason some people have difficulty with products is because they havn't prepped the surface correctly,and the product get's gummed up a bit once it gets applied.Could also be they were using something other than Meguiar's prior,ontop of many other reasons.

                TOP

                Comment

                Your Privacy Choices
                Working...
                X