• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

using UQW

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    using UQW

    What is Meguiar's recommended way to apply UQW?. In the How to Use the PC for Showcar Results, Mike Phillips sprayed NXT Spray Wax on an applicator pad and wiped it on the car like you would a regular wax. Is this the way to apply UQW? Hopefully one of the Mequiar's guys will answer as to how Meguiar's recommends applying.

    Dave
    You repair things with tools. You fix things with a hammer.
    Tags: None
  • #2
    Re: using UQW

    I give a spray of UQW to a microfiber towel, then spray the surface of the car I'm waxing. I spread it with the wet side of the towel then just flip to the other dry side of the towel and wipe it off. You don't have to wait of UQW to haze, that is what makes it so quick.

    I once put swirls in my paint just to see what it looked like.
    I don't always detail cars, but when I do, I prefer Meguiar's.
    Remove swirls my friends.

    Comment

    • #3
      Re: using UQW

      I prime the towel, and also spray the surface. I figure that lets it sort of "pre-soak" the surface.

      Comment

      • #4
        Re: using UQW

        They times I have used it I use it like a quick detailer, mist on wipe off. Just saw this write up it may help Secret to Applying UQW

        Comment

        • #5
          Re: using UQW

          Thanks John, that link gave me the answer I was looking for.

          Dave
          You repair things with tools. You fix things with a hammer.

          Comment

          Previous template Next
          Your Privacy Choices
          Working...
          X