Descent Process?

[AnthonyCorbo]

Process:
fficeffice" />
1.Meguiars Gold class 2 bucket wash

2.M06 and Mild clay bar

3.M07

4.Meguiars NXT2.0 WAX

5.UQD

What should i change or keep the same?

[Murr1525]

Re: Descent Process?

Why the M06?

Are you working by hand or machine?

[Megafast13]

Re: Descent Process?

I know your in Canada, but I really think you should try to find some M105/M205 to use with your DA

[Murr1525]

Re: Descent Process?

I know your in Canada, but I really think you should try to find some M105/M205 to use with your DA

Well, at least #80.

Dont know if the UC/SwirlX products have gotten there yet?

[AnthonyCorbo]

Re: Descent Process?

Why the M06?

Are you working by hand or machine?

By machine (PC 7424)

[AnthonyCorbo]

Re: Descent Process?

I know your in Canada, but I really think you should try to find some M105/M205 to use with your DA

Just thought that may be a little aggresive for a monthly use?

[ClearlyCoated]

Re: Descent Process?

Just thought that may be a little aggresive for a monthly use?

I think you're right, M105 is probably too aggressive for monthly use. Sounds like you would be better off with a mild paint cleaner followed by a polish and wax. Escalate up the aggressiveness ladder (Aggressiveness Order for New Consumer Products - This will surprise you!) to deal with spot problems.

You can also try this link for more ideas: Your Daily Driver: A Simple Wash & Wax Regimen

[Murr1525]

Re: Descent Process?

#205 or #80 would be fine monthly, but I think you'll find if you go with Nxt 2.0, UQD/UQW for maintaining, and proper wash techniques, you wont even feel the need to do it that often.

[AnthonyCorbo]

Re: Descent Process?

Thanks for the advice