G110 ?

[cm2005300]

im about to get a g110 and was wondering if the ads packages included everything i needed to run the g110 with m80 just to remove swirl marks?

[cm2005300]

Re: G110 ?

bump

[ClearlyCoated]

Re: G110 ?

Try these links:

Purchasing G110
Polishing Pads for G110

[Markus Kleis]

Re: G110 ?

The package has everything to make the G110 run, but keep in mind some swirls will need more cutting power than M80 can provide. Some can be so severe they need ultra compounds like M105.

I would suggest getting at the very least a 12 ounce sampler of M105 (DA friendly) from ADS just in case. Extra pads are also VERY nice (at least 3 yellow polishing pads).

[akimel]

Re: G110 ?

Do feel free to call Rick at ADS on the phone and talk to him about your needs and aims. He will set you up with the right products.

[Mike Phillips]

Re: G110 ?

The package has everything to make the G110 run, but keep in mind some swirls will need more cutting power than M80 can provide. Some can be so severe they need ultra compounds like M105.

I would suggest getting at the very least a 12 ounce sampler of M105 (DA friendly) from ADS just in case. Extra pads are also VERY nice (at least 3 yellow polishing pads).

The above is good advice and maybe look into getting either M205 or SwirlX, both of which are light cleaner/polishes with SwirlX being the more aggressive of the two.

M80 is a great product, one that I've personally used a ton of in my life so I'm a huge fan, but on some paint systems it can leave what's called micro-marring or haze and so far the new SMAT products are proving themselves to be really good at finishing out on a wider cross-section of paints, (at least from what I've seen and experienced).

[MrCLRider]

Re: G110 ?

i'm not trying to take business away from ADS, but if you can get Ultimate Compound, and Swirl-X, I keep reading nothing but good from those two products, and they are on the shelves of most places, if not, get some of that from Rick.