ok probably a stupid question

[toe]

I always have trouble polishing around emblems,for example an Acura has a lot of space in the "C".Enough space that you can't really just hand polish but extremely difficult with DA.I can always see the difference where I've hand polished vs. the DA.It's almost like I need a DA the size of a dremmel.Any suggestions or similar problems?

[Mike Phillips]

Re: ok probably a stupid question

There's no easy way outside of removing the emblems.

One get-by method is to just use a little piece of cloth with a cleaner/wax and push it around as best you can in these tiny areas and then wipe the excess wax out before it dries hard.

[john m.]

Re: ok probably a stupid question

^yeah i think that is probably the best solution

Other than that i really can think of anything, ive just kinda learned to live with it, it may bug me but other people arent going to be able to tell the difference

[J. A. Michaels]

Re: ok probably a stupid question

In areas like this, about all you can do is the best you can.

[Superior Shine]

Re: ok probably a stupid question

first clean all the nooks and crannies with STEAM, then use these and a microfiber towel to polish between the letters/numbers.

[H.E.D]

Re: ok probably a stupid question

first clean all the nooks and crannies with STEAM, then use these and a microfiber towel to polish between the letters/numbers

. Thats A Good Tip Will Give It A Try