205 Question for a newbie

[thedawg]

Have a 07 Tacoma & 03 Camry in good paint condition. Is the 205 a better option than using the 80 &83 after washing and claying. Then do I use the new NXT. 2.0 after Will be using the g110. What speed do I use the 205 at if this is a better option. Thanks

[mb911]

Re: 205 Question for a newbie

You'll have to determine for yourself really, but it won't hurt anything to try.

For me, yes I'd prefer #205 over #80. It's just even easier to use. You'd use speed setting 5 probably.

Now, for me, it isn't quite aggressive enough. but if #80 is normally aggressive enough for you, #205 would be about the same.

I say try it and see what you think. I think it's a very good product.

Yes, you would finish with your NXT for protection of the paint.

[Mike Phillips]

Re: 205 Question for a newbie

Have a 07 Tacoma & 03 Camry in good paint condition. Is the 205 a better option than using the 80 &83 after washing and claying. Then do I use the new NXT. 2.0 after Will be using the g110. What speed do I use the 205 at if this is a better option. Thanks

Our new products based upon SMA Technology work better and are easier to work with, so the answer to your first question is "yes".

As for speed, use a polishing pad on the 5.0 Speed Setting for the M205 or any swirl and scratch remover and the 3.0 to 4.0 for applying a finishing wax.

Check out the threads below,

How To use: G110 - G220 - G100 - PC/Porter Cable - UDM
If you're moving up to machine polishing, be sure to read the below thread before starting...
Tips & Techniques for using the G110, G100, G220 and the PC Dual Action Polisher
(These are all similar tools)


What's the difference between Meguiar's Super Micro Abrasive technology and Meguiar's Diminishing Abrasive technology?





Click on the images to go to their dedicated threads...


Swirl and Scratch Removers
Ultimate Compound
ScratchX 2.0
SwirlX


Most aggressive to least aggressive -->



M205 Ultra Finishing Polish & **NEW** M105 Ultra Cut Compound now for DA Polishers!
M205 Ultra Finishing Polish
M105 Ultra-Cut Compound - New Formula DA Polisher Approved

[Nappers]

Re: 205 Question for a newbie

M105/M205 may be the new 83/80 combo. I learned on M83/M80 so I have a hard time not grabbing the bottles (I do have M105, but not M205).

I like the results with the 105/205 so I will try them soon.

With the advise above, just try a test spot and get a process dialed in before doing your whole car and not like the results. And! clean that pad on the fly!

Keep us posted!