• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Remove buffer swirls from new paint

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Remove buffer swirls from new paint

    Originally posted by DarkBlue View Post
    Hi

    Which is more abrasive ScratchX or Deep Crystal Step 1 - Cleaner ?
    We would use the word aggressive, not abrasive because the word abrasive paints a picture in most people's minds as something that is gritty and will scratch the paint and none of our products in our Consumer Line will do that.

    The answer to your questions is ScratchX version 1.0 is a tick more aggressive than Deep Crystal Paint Cleaner. Both are very gentle as far as paint cleaners go.

    You can remove swirls out of clear coat paints with these two products but it requires good technique, sometimes multiple applications and you can only work a small section at at time.

    Clear coats are thin and easily dulled and scratched so no matter what you use you have to work very clean and work very carefully.

    Mike Phillips
    760-515-0444
    showcargarage@gmail.com

    "Find something you like and use it often"

    Comment


    • #17
      Re: Remove buffer swirls from new paint

      Originally posted by Mike Phillips View Post
      We would use the word aggressive, not abrasive because the word abrasive paints a picture in most people's minds as something that is gritty and will scratch the paint and none of our products in our Consumer Line will do that.

      The answer to your questions is ScratchX version 1.0 is a tick more aggressive than Deep Crystal Paint Cleaner. Both are very gentle as far as paint cleaners go.

      You can remove swirls out of clear coat paints with these two products but it requires good technique, sometimes multiple applications and you can only work a small section at at time.

      Clear coats are thin and easily dulled and scratched so no matter what you use you have to work very clean and work very carefully.

      Thanks Mike

      Comment

      Your Privacy Choices
      Working...
      X