Using DACP (#83) for first time, any advice?

[russell336]

I am going to try out DACP (#83) and / or Swirl Free Polish (#82) for the first time this coming weekend and was wondering if anyone has any advice.
I will be using the PC and both of my vehicles are black ( 2002 Conv. Mustang and 2004 F-150). I would say both are in real good condition with some minor swirls. I have tried with some success using Swirl Removal (# 9) and also ScratchX but always have some swirls visible. I really want to get these looking thier absolute best.
Also, what are some good microfiber towels to remove the products or can I use the PC? If so, what pad should I use?

Here is a link to

My Gallery

where you can see both vehicles.

Thanks in advance.

[zzzzzeke]

Some good information on this previous post

[Don]

1) Use sparingly 1 or 2 thin lines around the circumference of the pad

2) Keep the speed of the buffer above 4.5

3) You shouldn't take less than 30 seconds to cover a 2' x 2' area

4) Work it in until it's a thin-greasy looking smear on the surface

5) LIGHT pressure on the buffer, let the speed of the buffer do the work.