I wanted to see how other's use their APC on upholstery. What dilution ratio do you guys use it at? I personally dilute it 10:1 when using it on seats. Do you guys spray it directly on the seats/panels or do you spray it on a cloth and then rub it in? Do any of you go back with a clean damp (with water) cloth to "rinse" the upholstery before vacuuming? I have heard different ways of doing it and I would like to get Mike, and other's opinions on how to do it and get the best results.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
APC use on upholstery
Collapse
X
-
Re: APC use on upholstery
Originally posted by AeroCleanse View PostI spray it directly on the fabric at 10:1 first, then I used to agitate it with a brush then wipe up with a microfiber. Now I hit it with the steam cleaner before wiping down with a microfiber.
Comment
-
Re: APC use on upholstery
Originally posted by hondamtrco4life View PostWhat kind of steam cleaner do you use?
I have on of these:
Comment
-
Re: APC use on upholstery
Originally posted by hondamtrco4life View PostI have heard different ways of doing it and I would like to get Mike, and other's opinions on how to do it and get the best results.
Comment
-
-
Re: APC use on upholstery
Originally posted by Megafast13 View PostI was recently recommend the Bistell Little Green Machine:
http://www.amazon.com/Bissell-1425B-...0751626&sr=8-2. I really just wanted to get everyone's take on how they use APC when cleaning upholstery. I don't use machines like the LGM on upholstery because the foam in the seats get soaked with water/solution and take too long to dry.
Comment
-
Re: APC use on upholstery
This is how I use APC on upholstery:
I lightly spray down the seat with APC 10:1 and let it set in for a few seconds. I give the trouble spots a few more sprays. I then take a 100% cotton hand towel and rub in the solution. After that I use a heavy duty shop vac with an upholstery attachment to remove any lint or excess solution left in the fabric. This has been working great for me.
Comment
Comment