Tweet
diggin 151
I've been using 151 with the solo wool light cut pad on a rotary at 1100-1500rpms and have had great results. After using the rotary I apply 21 with a da. The finish is deep and rich. Did a black 50th anniversary Z06 yesterday that you could have used as a mirror to shave.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
Knowledge is power
2001 Silver Acura 3.2 CL
1996 Red Jeep Grand Cherokee Laredo
1978 21' Dodge RV (restored) -
Re: diggin 151
Sounds like some amazing results considering the few products you used.
-
Re: diggin 151
So you're using the white and yellow so1o wool? Are you finishing it out with that pad too?
I used that pad for the first time a few days ago and was very happy how well it finished for wool.Comment
-
Re: diggin 151
I don't use the solo system, but use the yellow wool pad with 151 and use the cut & cream for "by hand" rub-outs. By the way I have my da set at 1.5-2. The speeds depend on how "soft" the paint feels or the humidity/temp.Knowledge is power
2001 Silver Acura 3.2 CL
1996 Red Jeep Grand Cherokee Laredo
1978 21' Dodge RV (restored)Comment
-
Re: diggin 151
I am glad you achieved such great results. Way to go.quality creates its own demandComment
Comment