GOT pads, now need the rest.

[critical_level2]

Today I got my pads ordered. I ordered 2 orange, 2 white and 2 blue, along with a 3.5 inch backing plate.
Now I need to get some polish and sealers/wax. I have a local body shop supply store and they carry the full Megs Professional line. I was thinking of getting the Megs #83 and #80. Then finishing it up with Megs #21v.2 or NXT.
This is my first time using my PC7424. I have some swirls to remove, but the paint is not super bad.. Does this sound like a good plan for polish and sealant/wax to begin with. Its the polish part that is throwing me for a loop, as there are soo many choices.
Any and all suggestions are appreciated.
Thanks.

[Mike Phillips]

Re: GOT pads, now need the rest.

This is actually a fairly common collection of products that people have good results with, be careful with any cutting pads, be sure to do a Test Spot first.

Also, read this before starting,

If you're moving up to machine polishing, be sure to read the below thread before starting...
Tips & Techniques for using the G110, G100, G220 and the PC Dual Action Polisher
(These are all similar tools)