
I received some great advice from this forum on how to approach detailing my 2002 black C5. After claying, cleaning, polishing and nxt 2.0 waxing, it looked great, but with some deeper scratches that I will try M105 on later. It took about 12 hours to do by hand. My arms were dead, but it looked great!
Saturday, I decided to try M's ultimate detailer as the car only had some minor dust on it. I used MF cloths for both speading the product and drying/polishing. It looked great in the garage, but when in the sun, there were subtle scratching (mainly straight lines) all over the car as a result of my hand motions. I believe the mistake I made was the mf towels I bought at Advanced Auto parts were for drying and cleaning only. 10 for $11. Should I have used the polishing only towels, also at advanced? They do not sell M's mf towels.
I believe the surface was clean. The scratches must have come from the towels and my wiping motions. Or was I just naive to think I can detail a black car without washing it??
I'd like to avoid another 12 hours of detailing time. I have an old Waxmaster WB9000 d/a polisher/waxer with a 9" foam pad. RPM is listed as 3000 no load. I have a gray foam bonnet and a wool bonnet. I also have an unopened bottle of M's Swirl remover 2.0.
I'd like to try this sequence:
deep crystal wash
swirl remover 2.0 with d/a
deep crystal polishing with d/a
wax with nxt 2.0 wax by hand.
Should I use the wool or foam bonnet?
Any suggestions and/or thread/link references would be appreciated.
Tnx
Comment