i just bought NXT Generation Tech Wax® 2.0 came with a wax applicator but i just wanted to know what is the best way to apply the wax on the applicator? because this is my first time waxing a car with a real wax and i wanted to know how should i work into the finish? and when it dries to a haze should i wipe it off in a circular motion with a microfiber cloth or back n fourth?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
just bought nxt 2.0 tech wax need help!
Collapse
X
-
Re: just bought nxt 2.0 tech wax need help!
When applying thw wax place the wax on the applicator then do small circles and making sure its an even thin coat. When removing i do circles when working by hand and i tend to use a MF towel.
-
Re: just bought nxt 2.0 tech wax need help!
Like the others have said you want to apply with thin and even coats when using the NXT Generation Tech Wax 2.0. I prefer to work it into the surface in a circular fashion. Use microfiber towels to remove the wax as they lift 2-3 times as much as your average terry towel. Typically, you want the NXT to set up on the surface a minimum of 15-20 minutes before you take it off. If it's humid out it may even take longer to properly dry. Hope that works well for you!Rick McDonough
Customer Engagement - Digital Content Editor
Meguiar's Inc.
1.800.854.8073 * 3853
rmcdonough@meguiars.com
Comment
-
Re: just bought nxt 2.0 tech wax need help!
15-30 minutes should do it.
Just use the swipe test.
Andy
101impalaKeeping MOL family friendly! If you need help or have a question, don't hesitate to shoot me an email or PM. 101impala@gmail.com
Andy M. Moderator
Comment
Comment