Let's get RED again!

[skunkone]

Re: Let's get RED again!

oh yeah, forgot to mention, the list has been updated, but I can't purchase until the areas where there is a ----- have been properly resolved. So if anybody know, feel free to chime in. and i'm still planning on autodetailingsolutions/meguiar's to get my supplies.

[Mike Phillips]

Re: Let's get RED again!

See answers in red...

A3016 DEEP CRYSTAL PAINT CLEANER ---- should this be replaced/removed because of the M80? Yes if you're using M80 you don't need this.

M8032 BSP SPEED GLAZE 32OZ ------2-3 w8006 pads on speed 3/5? Speed 5.0 for removing swirls, if you can get the new pads you can machine wash, you'll be glad you did.


Step 3-
M0716 SHOW CAR GLAZE 16OZ ------2-3 w9006 pads on speed 2/4--- or best applied by hand?

If you use M80 Speed Glaze, there's enough polishing oils in the M80 that you don't have to use M07


Step 4-
G12718 NXT GENERATION TECH WAX 2.0 ------2-3 w9006 pad on speed 2/4--- would m21 be better even though I have a red car and the posts about it streaking? Going for as Dark, rich, wet red as possible. Also is it best applied by hand?

You really only need one or two finishing pads for applying waxes. M21 and NXT are pretty close to the same with the biggest difference being M21 can be applied using a rotary buffer which means it's formulated to be perform with the addition of heat as rotary buffers generate heat. Pick one and go with it.

[ronniejay]

Re: Let's get RED again!

cool, thanks for all the info guys.
well i haven't had any luck finding somebody that sells everything i need here locally, so i might have to search online, i wanted to do it this weekend, but im not sure if i'll have everything in by then.

what would be a good site to get everything and at a fair price?

Did you look at AJ Foyt PBE? There is one in the Heights and one out west on Bellaire. Call 1st, they may have to order in what you want. I am in Missouri City.

[skunkone]

Re: Let's get RED again!

yeah i checked it out, had nothing i needed, they were really too busy to help out, and prices were too expensive, i'll get it online cheaper.