Tweet
If anyone of you are using the Volks Racing TE-37 bronze wheels, you'll face abit of problem applying wax on the rough surface- it'll stain the finish making wax removal tough. Is it OK to apply vinyl/rubber protectant such as NXT Tech Protectant on the surface? Thanks.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
Hi Zey,
Chances are good if the wheel has a textured surface, (that's what it sounds like from the way you described them), the they are not meant to be coated with anything. Probably the best thing to do would be to contact the wheel manufacture and ask them what they recommend since they would be the expert when it comes to their own wheel.
Mike
Comment