I'm cleaning up a black Porsche Boxster for a friend, and I've run into an issue. The process I used was M80 then a coat of M21, then topping it with NXT 2.0. I let the M21 sit on the car for ~30 minutes, and removed it with the PC 7424 and a microfiber bonnet. I waited for 2 hours or so before applying the NXT and left that to dry for an hour. It was in the upper 50s this weekend, so the NXT took a little longer to dry. The car was in the garage the entire time also. Now I have streaks all over the car(at least the front and rear trunks from what I can see), and I've tried UQD, normal QD and Last Touch with both a Meguiar's MF and the soft terry cloth towel to remove, and the streaks show up in whatever direction I run the towels. It was hard to capture the streaks with the camera on the front, but when I ran my finger across the rear, they showed up better.


Does anyone know what would cause this and how to remove them, short of washing the car again? I did the M21 and NXT on Saturday and tried to remove the streaks on Sunday, hoping whatever it was, would be dry the next day. It was in the 70s on Sunday, so it was warm enough to dry whatever was on there. Thanks in advance.


Does anyone know what would cause this and how to remove them, short of washing the car again? I did the M21 and NXT on Saturday and tried to remove the streaks on Sunday, hoping whatever it was, would be dry the next day. It was in the 70s on Sunday, so it was warm enough to dry whatever was on there. Thanks in advance.
Comment