Is this Right?

[1971fordcustom]

I have 3 things of Qd
Deep Crystal Paint Cleaner and Polish
UQD
Smooth Surface Clay Kit
Gc Car Wash
Gc Wax
Cleaner Wax
Scratch X
Quik Glass Cleaner
Quik Interior Detailer
Hot Shine Tire gel
All Wheel Cleaner
A lot of SS MF'S
3 WM's
15 Applicator Pads

So am I missing any thing?? How Bad I Need the Grit Guards?

Im going to wash my truck some time Nex Week

#1 Wash
#2 Clay
#3 Paint Cleaner
#4 Polish
#5 Wax with Gc Wax
#6 Wate for a wile
#7 Use Qd to get rid of the dust
#8 Then put one more coat of wax on!

Does it sound ok!!

[Murr1525]

Re: Is this Right?

Well, you can of course wash without Grit Gaurds, but they do help. At least use 2 buckets, plus a third or refill for wheels.

Sounds like a pretty complete list... I mean, we can always add more and more....

Maybe a few more Water Magents wouldnt hurt in the future. And APC or APC+ are definately good products to have around.

[1971fordcustom]

Re: Is this Right?

Well, you can of course wash without Grit Gaurds, but they do help. At least use 2 buckets, plus a third or refill for wheels.

Sounds like a pretty complete list... I mean, we can always add more and more....

Maybe a few more Water Magents wouldnt hurt in the future. And APC or APC+ are definately good products to have around.

APC?? Im still new at this.

[Erik Mejia]

Re: Is this Right?

I don't believe you'll need the QD to remove dusting after GC. A SSMF will take care of that.

[Murr1525]

Re: Is this Right?

All Purpose Cleaner, or All Purpose Cleaner+. They are in the Detailer Line of products.

Being new, most of your products will be from the Consumer Line, (Nxt, Gold Class, Hot Rims, etc), but as you go on, you may find yourself mixing and matching produccts from all the product lines.

[ibnboxin]

Re: Is this Right?

lol you forgot the most important part of what people are going to ask for when your done. thats right camera with fresh batteries...lol

if you do not want to shell out the money for the grit gaurd. use a kitchen strainer of sorts. like a pasta one with holes in it. if you live with you mom, wife or girlfriend do not use her good one. as you will be in hot water so to speak...lol

umm if i remember reading right switch steps 2 and 3. on step 6 i would start the inside part of the truck or work on the wheels. but step 6 could also be where you sit back and have a drink.

[Murr1525]

Re: Is this Right?

Clay first, then Paint Cleaner.

[ibnboxin]

Re: Is this Right?

lol yeah was going back to correct that. never post before coffee.

[1971fordcustom]

Re: Is this Right?

One Other ? What can I put on my windshild rubber so the sun wont dry or fade it out

[Murr1525]

Re: Is this Right?

Any of the exterior dressings would be fine. The Trim Detailer might be easiest to find in a regular store, though it could be a bit rare. After that, there are products like All-Season Dressing from the Detailer Line or #40 Vinyl/Rubber Dressing (I think I have the name right) from the Professional Line.

[1971fordcustom]

Re: Is this Right?

Thanks ever one for the help!

Im going to have fun doing the inside of my truck sense its all black and chrome, Right now its not dirty at all. All new paintjob, All new seats carpet you name it, My truck is siting inside his house right now. In a month I've pulled it out maybe 3 times lol.