If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
is ok if i use deep crystal cleaner paint(step 1), then #7 , and then use #26, ?? or is better if i use fine cut cleaner #2 ??
It is perfectly ok to use DC1, #7 and #26 but it all depends on the paint correction you want to do. You can do a test spot for both the DC1 and #2 and see what result you like the best and then proceed with #7 and #26 after it. So its gonna be like this.
1. Wash
2. Clay if needed
3. DC1 or #2 on a test spot and use what gives you best results.
4. #7
5. #26
#26 is a pure carnuba wax. Correct me if I am wrong, but I believe that all Meguiar's waxes are mixes because a 100% carnuba wax would be impossible to apply and remove. #26 has a high content of wax compared to other products.
Comment