Tweet
So I want to purchase the PC 7424 is there anything else that I need to go with it that I may need to buy. I am going to use it on my boat..
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Pc 7424
A backing plate and some pads to start. I hope it's not too big of a boat.
Matt
2007 Lexus RX350
1998 Acura Integra -
Re: Pc 7424
What kind of boat?
How large?
What is the condition of the surface
Are you working on Gel-Coat or Paint - (some boats are painted)Comment
-
Re: Pc 7424
Its 19 feet good shape and gell coat..Comment
-
Re: Pc 7424
If it's not oxidized, or only lightly oxidized, then pick yourself up about a half dozen foam polishing pads and some Meguiar's M50 Cleaner/Wax and go to town on the boat. By using a cleaner/wax you'll insure the surface is cleaned, polished and waxed and you'll only have to go around the boat one time. If you keep up on the boat/finish, that is you don't let it deteriorate, then you can continue to use the M50 or move up to the Flagship when the M50 runs out. M50 can be purchased in bulk which you should do for a boat this size.
Comment
Comment